The Chopper Compendium

Here is a picture of my English Wheel. The wheels are from HF.

once I have proved out the drawings and bender function I will gladly share the files and do a build thread.

Perfect thank you again.
I hope to send the files out tomorrow.

Could you please measure over the last hole and the pivot pin.

Thanks again

Thank You

Using what you gave me this is what I have.

Thank you for your reply. I need the position of the 1 1/4" diameter holes in relation to the main pivot hole.
1) distance that the holes are offset
2) distance down to the first hole
3) distance down to the last hole

Your help is greatly appreciated

Here is what we are working on.

My son and I are building a tube bender to facilitate an SCCA cage fab. We will be using JD2 M32 dies for this project. We need the hole location dimensions for the back block pivots in the main frame which are 1 1/4 inch diameter. This bender is an upgrade to the CBH design to use the Model32 dies....