a friend of mine was given this frontend. he wasn't going to do anything with it so i took it upon myself to get it back in shape.
had to add a one inch piece to the front of the tree so i could drill the new riser bolt holes.
and just for the hell of it a pic of bill hollands shop from above.
saving a harman
- Maxthegardener
- Builder
- Posts: 384
- Joined: Tue Oct 25, 2011 11:28 am
- SELF INTRODUCTION: Name is Max living in scotland ,and building my first bike, Which is derived from a buellM2 Cyclone..Started with an engine and a Drop seat frame wich was made to my spec by a more experienced builder. would like to learn more about the skills and techniques required to build a frame so I value being a member here...Cheers Max
- Location: Angus, Scotland
Re: saving a harman
Really like the look of those on a chopper..you need to send them to me
Having never seen one in the flesh ...appreciate the pics...more please
Having never seen one in the flesh ...appreciate the pics...more please
-
- Conventioneer
- Posts: 277
- Joined: Sun Nov 06, 2011 12:46 pm
- SELF INTRODUCTION: Hey dan it chris (krymis) from the CBH board. thanks for opening this back up. hope to have a project to show the build here. BLAH BLAH BLAH BLAH BLAH and so on and so forth. The book of revolations and worlds ends and shit like that.....
Re: saving a harman
johnnyb its times like this i hate that i am so jealous of you
-
- Contributor
- Posts: 804
- Joined: Wed Oct 26, 2011 10:43 pm
- SELF INTRODUCTION: I was on the last board as bonustoolkit. I have changed that to my given name.
I started a project build there " File and Fit." I paln to continue that when I go back home in Dec. 2011. I first joined the board when Gary W had it in the year 2005. That was the time I really gained an interest in building chops. I have a long way to go, compared to some here.
Re: saving a harman
Someone had some heat.
A great score tho.
A great score tho.
- curt
- Long in the Tooth
- Posts: 1070
- Joined: Tue Oct 25, 2011 11:36 am
- SELF INTRODUCTION: hi everyone its me from the old bord hopeing to see everyone come here and all the newcomers . lets make this as good as the old one or even better . lookin foreward to seeing everyones projects continue and ill be continueing mine too
- Location: utica new york
Re: saving a harman
im with max never seen one in the flesh from start to finish
ever notice when you hit somethin or someone with a hammer you feel instantly better
-
- Contributor
- Posts: 804
- Joined: Wed Oct 26, 2011 10:43 pm
- SELF INTRODUCTION: I was on the last board as bonustoolkit. I have changed that to my given name.
I started a project build there " File and Fit." I paln to continue that when I go back home in Dec. 2011. I first joined the board when Gary W had it in the year 2005. That was the time I really gained an interest in building chops. I have a long way to go, compared to some here.
Re: saving a harman
Mark VDK has good pics on his site.
-
- Conventioneer
- Posts: 277
- Joined: Sun Nov 06, 2011 12:46 pm
- SELF INTRODUCTION: Hey dan it chris (krymis) from the CBH board. thanks for opening this back up. hope to have a project to show the build here. BLAH BLAH BLAH BLAH BLAH and so on and so forth. The book of revolations and worlds ends and shit like that.....
Re: saving a harman
curt you can stop buy and see some at my place any time. its usually a revolving door of them however i blueprint each and every one that i get.
-
- Conventioneer
- Posts: 277
- Joined: Sun Nov 06, 2011 12:46 pm
- SELF INTRODUCTION: Hey dan it chris (krymis) from the CBH board. thanks for opening this back up. hope to have a project to show the build here. BLAH BLAH BLAH BLAH BLAH and so on and so forth. The book of revolations and worlds ends and shit like that.....
Re: saving a harman
hans,
i bought his blueprint file and it is great for measurements but gives nothing to the major points of design. There are a few angles that are consistent on all the harmans plus the assembly of the rocker and spring setup and welding points.
i bought his blueprint file and it is great for measurements but gives nothing to the major points of design. There are a few angles that are consistent on all the harmans plus the assembly of the rocker and spring setup and welding points.
- curt
- Long in the Tooth
- Posts: 1070
- Joined: Tue Oct 25, 2011 11:36 am
- SELF INTRODUCTION: hi everyone its me from the old bord hopeing to see everyone come here and all the newcomers . lets make this as good as the old one or even better . lookin foreward to seeing everyones projects continue and ill be continueing mine too
- Location: utica new york
Re: saving a harman
krymis wrote:curt you can stop buy and see some at my place any time. its usually a revolving door of them however i blueprint each and every one that i get.
might just take you up on that soon as life slows down a lil. would love to pick your brain in person
ever notice when you hit somethin or someone with a hammer you feel instantly better