1979 Honda CB750 Bobber build
- jonester123
- Builder
- Posts: 402
- Joined: Tue Oct 25, 2011 12:06 pm
- SELF INTRODUCTION: Hello guys and gals, working on my 1979 honda cb750 bobber chopper build plus many other projects etc. I have two workshops at home that i built so i can build bikes and all sorts of parts, and i mainly do auto body work and restoration repairs etc.
- Location: Armstrong B.C Canada
- Contact:
Re: 1979 Honda CB750 Bobber build
Another picture, with frame back in jig and bolted to motor again. Checking to see how it is all looking.
- Attachments
-
- bth_100_1449_zps24ed6561 chopper build progress 1.jpg (13.59 KiB) Viewed 10943 times
- rudog
- Conventioneer
- Posts: 257
- Joined: Tue Oct 25, 2011 2:03 pm
- SELF INTRODUCTION: Jack of all. Master of none. Worked in a machine shop since I was 8. Desgined embedded computers for a few years. Done lots in between. If there's anything I've learned with certainty, "Anyone who looks like they know what they're doing is putting on an act."
- Location: Texoma
Re: 1979 Honda CB750 Bobber build
keep it up
- jonester123
- Builder
- Posts: 402
- Joined: Tue Oct 25, 2011 12:06 pm
- SELF INTRODUCTION: Hello guys and gals, working on my 1979 honda cb750 bobber chopper build plus many other projects etc. I have two workshops at home that i built so i can build bikes and all sorts of parts, and i mainly do auto body work and restoration repairs etc.
- Location: Armstrong B.C Canada
- Contact:
Re: 1979 Honda CB750 Bobber build
Hey rudog, hows it going been a long time. I just picked up my axle plates and one extra plate for my ram mounting bracket fabrication, already traced the axle template on plate. One plate will do both axle plates, of course had to purchase a big pack of cutting disks to cut it all out nicely. hahaha
- Attachments
-
- bth_100_1454_zpsf60e4d6b Axle plates fabing 2.jpg (8.21 KiB) Viewed 10933 times
- jonester123
- Builder
- Posts: 402
- Joined: Tue Oct 25, 2011 12:06 pm
- SELF INTRODUCTION: Hello guys and gals, working on my 1979 honda cb750 bobber chopper build plus many other projects etc. I have two workshops at home that i built so i can build bikes and all sorts of parts, and i mainly do auto body work and restoration repairs etc.
- Location: Armstrong B.C Canada
- Contact:
Re: 1979 Honda CB750 Bobber build
Progress today, got axle plates cut out to rough shape. Need to put them on the grinder to make nice and perfect, then drill out the axle slots. One step at a time.
- Attachments
-
- bth_100_1462_zps4957b756 Axle plates all cutt out.jpg (9.31 KiB) Viewed 10918 times
- Maz
- Biker Mistress
- Posts: 715
- Joined: Tue Oct 25, 2011 4:02 pm
- SELF INTRODUCTION: The Biker Mistress, Blonde, blue eyes, English Lady bike builder and previously a member of the CBH. I run my own custom bike and chop shop (MazChopz) on the south west coast of England. I have been building custom bikes for over 35 years and have built some 130 bikes so far. I am happy to share my knowledge and "expertise" and also hope to learn from the other forum members. I look forward to meeting up with many of my friends from the CBH and especially to seeing how Dan got on with his Knuck.
- Location: South West Coast of England
- Contact:
Re: 1979 Honda CB750 Bobber build
keep at it dude, I'm back again so will be keeping a watchful eye on you
Maz
Maz
Blonde, blue eyes, English Custom Bike builder and Biker Mistress!!!
- jonester123
- Builder
- Posts: 402
- Joined: Tue Oct 25, 2011 12:06 pm
- SELF INTRODUCTION: Hello guys and gals, working on my 1979 honda cb750 bobber chopper build plus many other projects etc. I have two workshops at home that i built so i can build bikes and all sorts of parts, and i mainly do auto body work and restoration repairs etc.
- Location: Armstrong B.C Canada
- Contact:
Re: 1979 Honda CB750 Bobber build
Thanks maz, I borrowed my neighbors tube bender, I got the lower frame rails bent up to axle plates. Twenty degree bends, soon as my air hydraulic 8 ton ram arrives then I can get it mounted on my jd2 bender and learn how to use it. Will it be strong enough to mount on my worktable now I will have the ram doing all the pressure, want to make sure of mounting it up good enough.
- jonester123
- Builder
- Posts: 402
- Joined: Tue Oct 25, 2011 12:06 pm
- SELF INTRODUCTION: Hello guys and gals, working on my 1979 honda cb750 bobber chopper build plus many other projects etc. I have two workshops at home that i built so i can build bikes and all sorts of parts, and i mainly do auto body work and restoration repairs etc.
- Location: Armstrong B.C Canada
- Contact:
Re: 1979 Honda CB750 Bobber build
Forgot to add picture hahaha
- Attachments
-
- bth_100_1466_zpsc7680fdd Chopper lower rails bent to axle plates.jpg (13.64 KiB) Viewed 10906 times
- Maz
- Biker Mistress
- Posts: 715
- Joined: Tue Oct 25, 2011 4:02 pm
- SELF INTRODUCTION: The Biker Mistress, Blonde, blue eyes, English Lady bike builder and previously a member of the CBH. I run my own custom bike and chop shop (MazChopz) on the south west coast of England. I have been building custom bikes for over 35 years and have built some 130 bikes so far. I am happy to share my knowledge and "expertise" and also hope to learn from the other forum members. I look forward to meeting up with many of my friends from the CBH and especially to seeing how Dan got on with his Knuck.
- Location: South West Coast of England
- Contact:
Re: 1979 Honda CB750 Bobber build
great news hun, nice to hear you are still at it
If you are using an air/hydraulic ram instead of a manual lever bar then you should be able to mount the bender on your table, just make sure the ram mounts are good and strong (lots of stored energy) and that they connect to the bender and not the table.....
Maz
If you are using an air/hydraulic ram instead of a manual lever bar then you should be able to mount the bender on your table, just make sure the ram mounts are good and strong (lots of stored energy) and that they connect to the bender and not the table.....
Maz
Blonde, blue eyes, English Custom Bike builder and Biker Mistress!!!
- jonester123
- Builder
- Posts: 402
- Joined: Tue Oct 25, 2011 12:06 pm
- SELF INTRODUCTION: Hello guys and gals, working on my 1979 honda cb750 bobber chopper build plus many other projects etc. I have two workshops at home that i built so i can build bikes and all sorts of parts, and i mainly do auto body work and restoration repairs etc.
- Location: Armstrong B.C Canada
- Contact:
Re: 1979 Honda CB750 Bobber build
Thanks maz, I will post up a picture of the ram all fabed up on bender. using thick wall tubing for mounting ram plus half inch thick plate. I will make sure it is all welded up real good and solid. hahaha
- jonester123
- Builder
- Posts: 402
- Joined: Tue Oct 25, 2011 12:06 pm
- SELF INTRODUCTION: Hello guys and gals, working on my 1979 honda cb750 bobber chopper build plus many other projects etc. I have two workshops at home that i built so i can build bikes and all sorts of parts, and i mainly do auto body work and restoration repairs etc.
- Location: Armstrong B.C Canada
- Contact:
Re: 1979 Honda CB750 Bobber build
Hey guys and gals, more progress. Got seat area and wishbone fabed up and welded real good, trimmed tubing to axle plates closer to size needed. Here is a picture. Also a picture of slow fabrication of seatpost and upper plus lower rear engine mounts.
- Attachments
-
- bth_100_1486_zpse5eb5ce3 chopper uper rear engine mounts fabing.jpg (10.82 KiB) Viewed 10888 times
-
- bth_100_1489_zps3bf48716 Rear hardtail mockup.jpg (12.95 KiB) Viewed 10888 times
- jonester123
- Builder
- Posts: 402
- Joined: Tue Oct 25, 2011 12:06 pm
- SELF INTRODUCTION: Hello guys and gals, working on my 1979 honda cb750 bobber chopper build plus many other projects etc. I have two workshops at home that i built so i can build bikes and all sorts of parts, and i mainly do auto body work and restoration repairs etc.
- Location: Armstrong B.C Canada
- Contact:
Re: 1979 Honda CB750 Bobber build
Hi guys and gals, my old welder broke down so I had to order a new one. I purchased eastwoods mig 135, it can be used with gas and comes with gas setup. Also can use fluxcore wire. Should arrive in about 10 days and I will post some pics of it and more progress.
- railroad bob
- Contributor
- Posts: 939
- Joined: Fri Nov 04, 2011 10:07 pm
- SELF INTRODUCTION: Hi Dan, thanks for your time and energy spent on this new board. I hope you will give me a waiver on the email account, I have used gmail so long I don't have a clue what my service provider account is.
I just returned home from a 2 week trip in New Mexico, have a few good pix, can't wait to share my off-highway traveling. Got to put 1400 miles on the scoot.
Best, Bob Davidson - Location: Alaska
Re: 1979 Honda CB750 Bobber build
You're a good example of persistence Jonester, keep it up, you'll get there.
Alaska - Land of the Individual and Other Endangered Species
An Armed Society is a Polite Society,...
Politicians Prefer Unarmed Peasants
TANSTAAFL
An Armed Society is a Polite Society,...
Politicians Prefer Unarmed Peasants
TANSTAAFL
- jonester123
- Builder
- Posts: 402
- Joined: Tue Oct 25, 2011 12:06 pm
- SELF INTRODUCTION: Hello guys and gals, working on my 1979 honda cb750 bobber chopper build plus many other projects etc. I have two workshops at home that i built so i can build bikes and all sorts of parts, and i mainly do auto body work and restoration repairs etc.
- Location: Armstrong B.C Canada
- Contact:
Re: 1979 Honda CB750 Bobber build
Some more progress pics on the hardtail frame build.
- Attachments
-
- bth_100_1589_zps30c4ad1c Axle plates fabed in place2.jpg (15.02 KiB) Viewed 10569 times
-
- bth_100_1588_zpsc8506562 Axle plates fabed in place1.jpg (13.84 KiB) Viewed 10569 times
- budoka
- Site Admin
- Posts: 492
- Joined: Thu Jul 21, 2011 12:51 pm
- SELF INTRODUCTION: I'm a Kentucky boy who's found himself transplanted into Japan. been into turning wrenches as long as i can remember. i love muscle cars, hotrod bikes, and the martial arts.
been a member of this board since back when it was a part of Chopperweb. been handling the tech side and sharing the admin duties for several years now. - Location: Fuefuki Shi, Japan
- Contact:
Re: 1979 Honda CB750 Bobber build
hang in there, man. we're all still here rootin' for ya and waiting to see that fire-up video, as well as the crap-eatin' grin on yer face after you take it for a spin.
take care,
-dan
take care,
-dan
-experience is a wonderful thing. It enables you to recognize a mistake when you make it again.
http://knuckleheadsummer.blogspot.com/
http://knuckleheadsummer.blogspot.com/
-
- Builder
- Posts: 368
- Joined: Wed Oct 26, 2011 4:49 am
- SELF INTRODUCTION: I am an expat tennessee hillbilly and retired us navy engineer livin' in Scotland and I have a love of old cars , trucks, motorcycles and most any other machinery !
I dont know if I can think of enough to say to reach the two hundred charactor minimun set by the mods , but I will persevere - Location: Greenock Scotland