jig pics
- railroad bob
- Contributor
- Posts: 939
- Joined: Fri Nov 04, 2011 10:07 pm
- SELF INTRODUCTION: Hi Dan, thanks for your time and energy spent on this new board. I hope you will give me a waiver on the email account, I have used gmail so long I don't have a clue what my service provider account is.
I just returned home from a 2 week trip in New Mexico, have a few good pix, can't wait to share my off-highway traveling. Got to put 1400 miles on the scoot.
Best, Bob Davidson - Location: Alaska
Re: jig pics
Excellent link, thanks!!!
Alaska - Land of the Individual and Other Endangered Species
An Armed Society is a Polite Society,...
Politicians Prefer Unarmed Peasants
TANSTAAFL
An Armed Society is a Polite Society,...
Politicians Prefer Unarmed Peasants
TANSTAAFL
- hdwgfx
- NewB
- Posts: 24
- Joined: Thu Oct 27, 2011 2:17 pm
- SELF INTRODUCTION: Long time member in Greater New Orleans Area. I have been riding since I was 14 yrs old, first Harley in 1973. I own a 02 fxdx and a 01 fxdwg which is all apart. I have been a full time caregiver for my mother for the last 6 yrs. before that I was a network administrator for a big oil company but most of my life I have been mechanic/machinist etc. this is boring gezzzz
Re: jig pics
Sam Wills - Racing Innovations - Pics From Miller Welding video -->
http://www.youtube.com/watch?feature=en ... pt1tfPEC00
[br]
http://www.youtube.com/watch?feature=en ... pt1tfPEC00
[br]
NOTW
-
- NewB
- Posts: 2
- Joined: Fri Jun 22, 2012 7:15 pm
- SELF INTRODUCTION: I am a mechanical engineer in Melbourne, Australia.
My focus is primarily motorbikes, because a) I don't have enough space to build hotrods, b) I can't justify the money to build hot rods, nor do I want to pay someone to do it, and c) I want to finish a project in less than 5 years.
I'm into garage engineering - design engineering, welding, fabrication, machining, lathes, milling, and custom motor bikes and cars. As with most Garage Engineers, you have a long term project in mind (say, building a hotrod), but there are literally a thousand projects to do before you start or that come up along the way.
My website (www.matthewmcleod.id.au) is the record of my journey. Not sure what my destination is, but I'll make some scrap metal along the way. - Location: Melbourne, Australia
- Contact:
Re: jig pics
Just joined the forum and have bought Gary's CD....been planning my jig build, looked at a bunch of pics and a couple of plans and always wondered why guys didn't build the jig frame on a rotisserie so you can do some of the nasty upside down welding the right way up...?
Seems to be a couple of pics in this thread of jigs that can rotate, might be enough to get me started, but if anyone has any thoughts, I'd be glad to hear them.
Cheers
Seems to be a couple of pics in this thread of jigs that can rotate, might be enough to get me started, but if anyone has any thoughts, I'd be glad to hear them.
Cheers
-
- Contributor
- Posts: 804
- Joined: Wed Oct 26, 2011 10:43 pm
- SELF INTRODUCTION: I was on the last board as bonustoolkit. I have changed that to my given name.
I started a project build there " File and Fit." I paln to continue that when I go back home in Dec. 2011. I first joined the board when Gary W had it in the year 2005. That was the time I really gained an interest in building chops. I have a long way to go, compared to some here.
Welding Upside Down.
Jigs that Rotate.
I don't remember if this has been referenced here already.
http://www.voodoovintage.com/products
Scroll down till you see this.
I don't remember if this has been referenced here already.
http://www.voodoovintage.com/products
Scroll down till you see this.
-
- NewB
- Posts: 2
- Joined: Fri Jun 22, 2012 7:15 pm
- SELF INTRODUCTION: I am a mechanical engineer in Melbourne, Australia.
My focus is primarily motorbikes, because a) I don't have enough space to build hotrods, b) I can't justify the money to build hot rods, nor do I want to pay someone to do it, and c) I want to finish a project in less than 5 years.
I'm into garage engineering - design engineering, welding, fabrication, machining, lathes, milling, and custom motor bikes and cars. As with most Garage Engineers, you have a long term project in mind (say, building a hotrod), but there are literally a thousand projects to do before you start or that come up along the way.
My website (www.matthewmcleod.id.au) is the record of my journey. Not sure what my destination is, but I'll make some scrap metal along the way. - Location: Melbourne, Australia
- Contact:
Re: Jigs that rotate
Thanks hans...
Another good idea to add to my own design!
Cheers
Matt
Another good idea to add to my own design!
Cheers
Matt
- hdwgfx
- NewB
- Posts: 24
- Joined: Thu Oct 27, 2011 2:17 pm
- SELF INTRODUCTION: Long time member in Greater New Orleans Area. I have been riding since I was 14 yrs old, first Harley in 1973. I own a 02 fxdx and a 01 fxdwg which is all apart. I have been a full time caregiver for my mother for the last 6 yrs. before that I was a network administrator for a big oil company but most of my life I have been mechanic/machinist etc. this is boring gezzzz
-
- Lurker
- Posts: 66
- Joined: Fri Dec 23, 2011 1:21 am
- SELF INTRODUCTION: dan. my names john or jbfrmca on most boards . i was on the old board(not very much i'm afraid) been messing with bikes my whole life. still want to learn as much as i can while i can. thanks in advance. later john.
Re: jig pics
freddy.
-
- Lurker
- Posts: 86
- Joined: Wed Oct 26, 2011 9:33 am
- SELF INTRODUCTION: Just an Iowa country boy that has been pouring concrete for over 30 years. I have been around for awhile. I have watched 3 forums come and go. I built my first chop with the help of the great guys on this forum. I plan on building a few more. $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ I don't have the 200 word in me this morning! 8)
- hdwgfx
- NewB
- Posts: 24
- Joined: Thu Oct 27, 2011 2:17 pm
- SELF INTRODUCTION: Long time member in Greater New Orleans Area. I have been riding since I was 14 yrs old, first Harley in 1973. I own a 02 fxdx and a 01 fxdwg which is all apart. I have been a full time caregiver for my mother for the last 6 yrs. before that I was a network administrator for a big oil company but most of my life I have been mechanic/machinist etc. this is boring gezzzz
-
- Lurker
- Posts: 66
- Joined: Fri Dec 23, 2011 1:21 am
- SELF INTRODUCTION: dan. my names john or jbfrmca on most boards . i was on the old board(not very much i'm afraid) been messing with bikes my whole life. still want to learn as much as i can while i can. thanks in advance. later john.
Re: jig pics
a few more.