La Puttana ------Build------ Ride her hard, Sell her Cheap

Customize IT · Post by **Customize IT** » Thu Jun 04, 2015 9:23 pm

Got the first round of the spray filler sanded. sanded with 180 grit. Next to apply the bondo filler.

Customize IT · Post by **Customize IT** » Fri Jun 05, 2015 12:49 am

Started molding the frame. Applied filler to all the welds that can be seen. Now to sand with 80 grit sand paper.

Customize IT · Post by **Customize IT** » Fri Jun 05, 2015 5:52 am

I was able to get the sanding done on the frame for the molding. And the side of the battery box that is seen.

Customize IT · Post by **Customize IT** » Fri Jun 05, 2015 11:26 am

Got everything shot back in epoxy primer to seal it and also picked up my paint today!

Jeff L · Post by **Jeff L** » Fri Jun 05, 2015 4:19 pm

gonna look real nice with color man.

Customize IT · Post by **Customize IT** » Wed Jun 10, 2015 8:27 am

Bought some Fiberglass filler and used for inside mudgaurd and also by the hinge on battery box. Got the initial muddings done of the fender, battery box door, and the Petrol Tank. Also smoothed the frame where the primer showed flaws in the molding.

Customize IT · Post by **Customize IT** » Wed Jun 10, 2015 7:04 pm

Was able to get the 3 pieces back in a heavy coat of primer because the hand filler really soaks it up. Need them in primer to coat with the last coat of spray filler. When they dry can sand the frame, forks, and these parts with 180 grit to prepare for spray filler.

Customize IT · Post by **Customize IT** » Thu Jun 11, 2015 6:38 am

8 hrs hand sanding this frame with 180 grit in every nook and cranny. About to shoot in primer and do it all again with 320 grit. Good thing is I can open the flake and look for motivation!

Customize IT · Post by **Customize IT** » Thu Jun 11, 2015 8:32 am

Got the frame back into primer. From here will scotch brite and 320 grit sand to prepare for the second coat of spray filler.

Customize IT · Post by **Customize IT** » Thu Jun 11, 2015 7:45 pm

My Girl found me a couple nice lace patterns for the tins today!

curt · Post by **curt** » Thu Jun 11, 2015 8:33 pm

got me jonzing to see the color go down like a junkie waitin for a fix

railroad bob · Post by **railroad bob** » Sun Jun 14, 2015 12:42 pm

curt wrote:got me jonzing to see the color go down like a junkie waitin for a fix

me too

Jeff L · Post by **Jeff L** » Sun Jun 14, 2015 9:04 pm

I think everyone is waiting to see that blue pop....

Customize IT · Post by **Customize IT** » Wed Jun 17, 2015 1:34 am

Finally got all the spot shooting and after about 14 hrs prep work sanding the frame and forks are ready for the final shoot of spray filler. It has been raining and humid here 80 - 90 degree heat. Has made the drying times long and also very exhausting work sanding.

Customize IT · Post by **Customize IT** » Wed Jun 17, 2015 3:10 am

Got the last coat of spray filler applied. After this is sanded whatever it is will be primed for paint. I will take it no straighter than this step.

The Chopper Compendium

La Puttana ------Build------ Ride her hard, Sell her Cheap

Re: La Puttana ------Build------ Ride her hard, Sell her Che

Re: La Puttana ------Build------ Ride her hard, Sell her Che

Re: La Puttana ------Build------ Ride her hard, Sell her Che

Re: La Puttana ------Build------ Ride her hard, Sell her Che

Re: La Puttana ------Build------ Ride her hard, Sell her Che

Re: La Puttana ------Build------ Ride her hard, Sell her Che

Re: La Puttana ------Build------ Ride her hard, Sell her Che

Re: La Puttana ------Build------ Ride her hard, Sell her Che

Re: La Puttana ------Build------ Ride her hard, Sell her Che

Re: La Puttana ------Build------ Ride her hard, Sell her Che

Re: La Puttana ------Build------ Ride her hard, Sell her Che

Re: La Puttana ------Build------ Ride her hard, Sell her Che

Re: La Puttana ------Build------ Ride her hard, Sell her Che

Re: La Puttana ------Build------ Ride her hard, Sell her Che

Re: La Puttana ------Build------ Ride her hard, Sell her Che