The Chopper Compendium

Got the 2 axle plate pieces made.

The rear tail section has all its parts.





Now to mind fight the motor mounts. May as well start with the hardest? I only left myself 3/4 in for engine removal of clearance without taking the oil pan off. Helps the look of bike but, no tabs can be welded to the top off this rail? May have to brace it out to the side and make a plate that bolts to the side and drill 2 1/2 holes for bolts each side off the hole there?

This is what I was thinking?

Just make a couple spacers to space it out from the rail and 3/8ths bolts should work 2 of them?

May just do this?

Hell I might be the only one to ever look at the motor mounts on her?

Are they real noticable out the side like this?

Might be able to use them there to make a exhaust mount also off of latter?

Got those 2 mounts done and on to the next hardest one.

This has to be able to drop away from motor and come out the side.







Welded the cross bar in already now to make the connecting part to the back bone.

Got that mount done and it comes in and out with engine in the frame. Did not want to go down to the cross brace here for the oil coolers to have enough room.

On to the next one there is plenty of room here.

Got that mount done now one top the front one.

Got the front motor mount made.

Now to make the support beam for the downtube thing.

Got the centers made for the down tube thing supports.

Got the supports made and the neck gusset.

All the parts are there I will weld the frame next week and find some help to pull the motor in and out and this frame will be done and off the jig.

Some pics of the Frame done before it gets welded and comes off the jig.

Scored a Vertical bandsaw and a bigger sandblaster.

The sand blaster the top opens like a clam shell and can fit full engines in plus has a dust removal system.

Ya I know right?

Got the vertical band saw 20 inchs of throat 500 lb capacity tilt table in! Who needs room when you got tools? You can only use one thing at a time any way just pull out what you need. Still enough room to use my mill. I see new levels of custom made trees in my future now. Need to get a new saw blade but, she is wired up ready to go!

The blast cabinet is probably my most used tool.Wish I had a dust remover for it....good score dude...seems all you need to do now is build yourself an oven & start powder coating...frame is killer btw