Re: La Puttana ------Build------ Ride her hard, Sell her Che
Posted: Wed Jul 08, 2015 4:15 am
Little inside joke here? Always Wear Protection when riding a Whore right?
I will not profess to being a expert at this but, a GOOD friend [Dusty] told and taught me how he did lettering. In fact have never held a air brush before this bike. Printed off my script.
![Image](http://i.imgur.com/fsPu8YEl.jpg)
Cut it out with a exacto knife.
![Image](http://i.imgur.com/NKIBi6Wl.jpg)
Trimmed the paper down so it would conform to the helmet.
![Image](http://i.imgur.com/a9Vs1Qul.jpg)
Used hot soapy water and wet the helmet and paper templete.
![Image](http://i.imgur.com/nIqZCZCl.jpg)
Stuck it to the helmet and added all the little pieces for the A's and O's.
![Image](http://i.imgur.com/szkMWYkl.jpg)
Taped the edges down.
![Image](http://i.imgur.com/ARW4VZpl.jpg)
Built a box out of tape to keep the over spray in.
![Image](http://i.imgur.com/vP8LKixl.jpg)
Air brushed the color.
![Image](http://i.imgur.com/haFYDHul.jpg)
Painted.
![Image](http://i.imgur.com/ISW2yUOl.jpg)
Used and exacto knife to pull the little A and O pieces out. Then lightly scratched the places around the letters I wanted to clean up.
![Image](http://i.imgur.com/arFqMQsl.jpg)
Used scotch brite to take off any over spray off that may have got under paper.
![Image](http://i.imgur.com/RkShcBAl.jpg)
Done.
![Image](http://i.imgur.com/w6lX5h7l.jpg)
I will not profess to being a expert at this but, a GOOD friend [Dusty] told and taught me how he did lettering. In fact have never held a air brush before this bike. Printed off my script.
![Image](http://i.imgur.com/fsPu8YEl.jpg)
Cut it out with a exacto knife.
![Image](http://i.imgur.com/NKIBi6Wl.jpg)
Trimmed the paper down so it would conform to the helmet.
![Image](http://i.imgur.com/a9Vs1Qul.jpg)
Used hot soapy water and wet the helmet and paper templete.
![Image](http://i.imgur.com/nIqZCZCl.jpg)
Stuck it to the helmet and added all the little pieces for the A's and O's.
![Image](http://i.imgur.com/szkMWYkl.jpg)
Taped the edges down.
![Image](http://i.imgur.com/ARW4VZpl.jpg)
Built a box out of tape to keep the over spray in.
![Image](http://i.imgur.com/vP8LKixl.jpg)
Air brushed the color.
![Image](http://i.imgur.com/haFYDHul.jpg)
Painted.
![Image](http://i.imgur.com/ISW2yUOl.jpg)
Used and exacto knife to pull the little A and O pieces out. Then lightly scratched the places around the letters I wanted to clean up.
![Image](http://i.imgur.com/arFqMQsl.jpg)
Used scotch brite to take off any over spray off that may have got under paper.
![Image](http://i.imgur.com/RkShcBAl.jpg)
Done.
![Image](http://i.imgur.com/w6lX5h7l.jpg)