gonna be a slow build
- sleepyonthree
- Stalker
- Posts: 140
- Joined: Tue Oct 25, 2011 11:10 am
- SELF INTRODUCTION: All around tinkerer. Hotrods, cycles, trikes, gardening, cooking, women. Originally joined CBH Jan 29, 2006. Way to many projects, but, thats the fun. Live out in the boonies, less complaints from conformist neighbors.
- Location: G,ville Florida
gonna be a slow build
Okay, put my thread back in so I'll have a pickup point when I get back to it.
- Attachments
-
- starting with the uncut donor axle
- uncut axle.JPG (75.32 KiB) Viewed 10125 times
-
- not the same axle but shows how much it was shortened 32 in back plate to back plate
- cut axle hsg.JPG (20.37 KiB) Viewed 10125 times
-
- cut axle bolted together for welding
- axle fixture.JPG (51.3 KiB) Viewed 10125 times
-
- electrolysis set up with laundry soda to help remove rust
- Laundry Soda barrell.JPG (135.03 KiB) Viewed 10125 times
-
- workin up the axle plates
- starting axle plates.JPG (124.55 KiB) Viewed 10125 times
-
- axles plate
- axle plate.JPG (120.88 KiB) Viewed 10125 times
nothing is foolproof to a sufficiently talented fool
- sleepyonthree
- Stalker
- Posts: 140
- Joined: Tue Oct 25, 2011 11:10 am
- SELF INTRODUCTION: All around tinkerer. Hotrods, cycles, trikes, gardening, cooking, women. Originally joined CBH Jan 29, 2006. Way to many projects, but, thats the fun. Live out in the boonies, less complaints from conformist neighbors.
- Location: G,ville Florida
Re: gonna be a slow build
and a continuation.
- Attachments
-
- getting the tail frame put together
- started on tail.JPG (140.16 KiB) Viewed 10124 times
-
- made myself a purty neck fixture
- neck fixture.JPG (126.14 KiB) Viewed 10124 times
-
- getting the big chunks set in place
- gittin mocked up.JPG (82.39 KiB) Viewed 10124 times
-
- double cardan made from the cut down driveshaft
- double cardan.JPG (116.45 KiB) Viewed 10124 times
-
- fitting bottom rails
- starting bottom tubes.JPG (62.99 KiB) Viewed 10124 times
-
- bottom rails takin shape
- HPIM0652.JPG (77.46 KiB) Viewed 10124 times
nothing is foolproof to a sufficiently talented fool
- sleepyonthree
- Stalker
- Posts: 140
- Joined: Tue Oct 25, 2011 11:10 am
- SELF INTRODUCTION: All around tinkerer. Hotrods, cycles, trikes, gardening, cooking, women. Originally joined CBH Jan 29, 2006. Way to many projects, but, thats the fun. Live out in the boonies, less complaints from conformist neighbors.
- Location: G,ville Florida
Re: gonna be a slow build
some more
- Attachments
-
- adding the top rails
- top rails.JPG (136.97 KiB) Viewed 10123 times
-
- makin the neck a bit more solid
- building up the neck.JPG (121.88 KiB) Viewed 10123 times
-
- some scraps to hold things in place
- wood jig for engine mounts.JPG (118.72 KiB) Viewed 10123 times
-
- using drill and flat file to turn down inner sleeves for motor mounts
- old fashined lathing.JPG (115.36 KiB) Viewed 10123 times
-
- engine mounts.JPG (134.44 KiB) Viewed 10123 times
nothing is foolproof to a sufficiently talented fool
- sleepyonthree
- Stalker
- Posts: 140
- Joined: Tue Oct 25, 2011 11:10 am
- SELF INTRODUCTION: All around tinkerer. Hotrods, cycles, trikes, gardening, cooking, women. Originally joined CBH Jan 29, 2006. Way to many projects, but, thats the fun. Live out in the boonies, less complaints from conformist neighbors.
- Location: G,ville Florida
Re: gonna be a slow build
the donor motor. A 350 from and old camper. 1689xx mi on broken odometer. turned out to be a crate replacement with about 5000 mi on it.
- Attachments
-
- engine.jpg (72.13 KiB) Viewed 10122 times
nothing is foolproof to a sufficiently talented fool
- jonester123
- Builder
- Posts: 402
- Joined: Tue Oct 25, 2011 12:06 pm
- SELF INTRODUCTION: Hello guys and gals, working on my 1979 honda cb750 bobber chopper build plus many other projects etc. I have two workshops at home that i built so i can build bikes and all sorts of parts, and i mainly do auto body work and restoration repairs etc.
- Location: Armstrong B.C Canada
- Contact:
Re: gonna be a slow build
Very cool and nice work there sleepyonthree. I have also been thinking about making a trike, i have a spare turbo 350 transmission in good shape plus rear end and a 350 engine to use. Engine needs a bit of rebuild but would be cool for a kick ass trike build. Time will tell
- budoka
- Site Admin
- Posts: 492
- Joined: Thu Jul 21, 2011 12:51 pm
- SELF INTRODUCTION: I'm a Kentucky boy who's found himself transplanted into Japan. been into turning wrenches as long as i can remember. i love muscle cars, hotrod bikes, and the martial arts.
been a member of this board since back when it was a part of Chopperweb. been handling the tech side and sharing the admin duties for several years now. - Location: Fuefuki Shi, Japan
- Contact:
Re: gonna be a slow build
you know, i was wondering if you were making any progress on this. get on it man, this is an awesome project!
-dan
-dan
-experience is a wonderful thing. It enables you to recognize a mistake when you make it again.
http://knuckleheadsummer.blogspot.com/
http://knuckleheadsummer.blogspot.com/
- Maxthegardener
- Builder
- Posts: 384
- Joined: Tue Oct 25, 2011 11:28 am
- SELF INTRODUCTION: Name is Max living in scotland ,and building my first bike, Which is derived from a buellM2 Cyclone..Started with an engine and a Drop seat frame wich was made to my spec by a more experienced builder. would like to learn more about the skills and techniques required to build a frame so I value being a member here...Cheers Max
- Location: Angus, Scotland
- jimmib
- Lurker
- Posts: 91
- Joined: Tue Oct 25, 2011 1:35 pm
- SELF INTRODUCTION: Hello everyone. first of all a big thanks to "Dan the Man". Some of you know me from the previous (2) boards and some don't, so here goes. I have been a fabricator/welder for over 40 years now. Damn that's a helluva long time to do anything! Anyways, I have built literaly 100's of street rods, pro streeters, racecars, bikes and trikes over the years. Never made the headlines and never will. I do what I do because it is the love of my life.
I enjoy reading the posts on the forum and try to contribute when I can. I am sure that this will be every bit as good as the CBH forum, as we will have most of the same folks. Good luck and post a lot of pics!! Jim - Location: Lowcountry USA
Re: gonna be a slow build
Thought for a minute you were building an Olds Trike with that Rocket valve cover. Good job.
Jim
Jim
Whoa!...Musta stood up too fast...
Ever stop to think and forget to start again?
An optomist is no more than a pessimist with an idea.
Gun control is hitting what you are aiming at.....
Ever stop to think and forget to start again?
An optomist is no more than a pessimist with an idea.
Gun control is hitting what you are aiming at.....
- sleepyonthree
- Stalker
- Posts: 140
- Joined: Tue Oct 25, 2011 11:10 am
- SELF INTRODUCTION: All around tinkerer. Hotrods, cycles, trikes, gardening, cooking, women. Originally joined CBH Jan 29, 2006. Way to many projects, but, thats the fun. Live out in the boonies, less complaints from conformist neighbors.
- Location: G,ville Florida
Re: gonna be a slow build
jimmib wrote:Thought for a minute you were building an Olds Trike with that Rocket valve cover. Good job.
Jim
Found them in my stash while rummaging about. Strongly considering making and adapter plate to use them on the chevy motor.
nothing is foolproof to a sufficiently talented fool
- jimmib
- Lurker
- Posts: 91
- Joined: Tue Oct 25, 2011 1:35 pm
- SELF INTRODUCTION: Hello everyone. first of all a big thanks to "Dan the Man". Some of you know me from the previous (2) boards and some don't, so here goes. I have been a fabricator/welder for over 40 years now. Damn that's a helluva long time to do anything! Anyways, I have built literaly 100's of street rods, pro streeters, racecars, bikes and trikes over the years. Never made the headlines and never will. I do what I do because it is the love of my life.
I enjoy reading the posts on the forum and try to contribute when I can. I am sure that this will be every bit as good as the CBH forum, as we will have most of the same folks. Good luck and post a lot of pics!! Jim - Location: Lowcountry USA
Re: gonna be a slow build
That would be a cool touch!
Whoa!...Musta stood up too fast...
Ever stop to think and forget to start again?
An optomist is no more than a pessimist with an idea.
Gun control is hitting what you are aiming at.....
Ever stop to think and forget to start again?
An optomist is no more than a pessimist with an idea.
Gun control is hitting what you are aiming at.....
- railroad bob
- Contributor
- Posts: 939
- Joined: Fri Nov 04, 2011 10:07 pm
- SELF INTRODUCTION: Hi Dan, thanks for your time and energy spent on this new board. I hope you will give me a waiver on the email account, I have used gmail so long I don't have a clue what my service provider account is.
I just returned home from a 2 week trip in New Mexico, have a few good pix, can't wait to share my off-highway traveling. Got to put 1400 miles on the scoot.
Best, Bob Davidson - Location: Alaska
Re: gonna be a slow build
I still love the way you cleaned up the differential, way cool...
I asked you before about your plan to remove the motor ater the frame is complete, in case you needed to swap it out.
I think you said the plan was to just take it apart while in the frame.
Have you considered pinning the top backbone so it could be removed?
I asked you before about your plan to remove the motor ater the frame is complete, in case you needed to swap it out.
I think you said the plan was to just take it apart while in the frame.
Have you considered pinning the top backbone so it could be removed?
Alaska - Land of the Individual and Other Endangered Species
An Armed Society is a Polite Society,...
Politicians Prefer Unarmed Peasants
TANSTAAFL
An Armed Society is a Polite Society,...
Politicians Prefer Unarmed Peasants
TANSTAAFL
- sleepyonthree
- Stalker
- Posts: 140
- Joined: Tue Oct 25, 2011 11:10 am
- SELF INTRODUCTION: All around tinkerer. Hotrods, cycles, trikes, gardening, cooking, women. Originally joined CBH Jan 29, 2006. Way to many projects, but, thats the fun. Live out in the boonies, less complaints from conformist neighbors.
- Location: G,ville Florida
Re: gonna be a slow build
The electrolysis bath sure makes for less time in the blast cabinent and it only does the rust, good metal remains untouched.railroad bob wrote:I still love the way you cleaned up the differential, way cool...
I asked you before about your plan to remove the motor ater the frame is complete, in case you needed to swap it out.
I think you said the plan was to just take it apart while in the frame.
Have you considered pinning the top backbone so it could be removed?
Had considered a removable backbone, but given the easy access to the motor I went all welded. The motor I'm using for mockup is a bare unit, once the real ones in place if I pull it out its to take it apart anyhoo so mights well do it from the outset.
Last edited by sleepyonthree on Wed Nov 16, 2011 9:50 am, edited 1 time in total.
nothing is foolproof to a sufficiently talented fool
- sleepyonthree
- Stalker
- Posts: 140
- Joined: Tue Oct 25, 2011 11:10 am
- SELF INTRODUCTION: All around tinkerer. Hotrods, cycles, trikes, gardening, cooking, women. Originally joined CBH Jan 29, 2006. Way to many projects, but, thats the fun. Live out in the boonies, less complaints from conformist neighbors.
- Location: G,ville Florida
Re: gonna be a slow build
Whoops, to quick(spastic) on the keys.
nothing is foolproof to a sufficiently talented fool
- Maz
- Biker Mistress
- Posts: 714
- Joined: Tue Oct 25, 2011 4:02 pm
- SELF INTRODUCTION: The Biker Mistress, Blonde, blue eyes, English Lady bike builder and previously a member of the CBH. I run my own custom bike and chop shop (MazChopz) on the south west coast of England. I have been building custom bikes for over 35 years and have built some 130 bikes so far. I am happy to share my knowledge and "expertise" and also hope to learn from the other forum members. I look forward to meeting up with many of my friends from the CBH and especially to seeing how Dan got on with his Knuck.
- Location: South West Coast of England
- Contact:
Re: gonna be a slow build
hmmmmmmmmmmmmmmmm, very interesting...... now where can I find a large V8 and autobox......?
Maz xx
Maz xx
Blonde, blue eyes, English Custom Bike builder and Biker Mistress!!!
- sleepyonthree
- Stalker
- Posts: 140
- Joined: Tue Oct 25, 2011 11:10 am
- SELF INTRODUCTION: All around tinkerer. Hotrods, cycles, trikes, gardening, cooking, women. Originally joined CBH Jan 29, 2006. Way to many projects, but, thats the fun. Live out in the boonies, less complaints from conformist neighbors.
- Location: G,ville Florida
Re: gonna be a slow build
Maz wrote:hmmmmmmmmmmmmmmmm, very interesting...... now where can I find a large V8 and autobox......?
Maz xx
The Rover V8 makes for a good looking trike.
nothing is foolproof to a sufficiently talented fool