My evening update from Derek........I never can get enough of freshly machined pics........
The non drum side is done. Drive side has dowel holes, and through holes, drive side is a nice tight fit to the bolt head in the counterbore.
Since the drum bolts are an oddball 20tpi bolt, he cutting down the longer bolts to the shank, rethreading them to 20tpi, and I believe there was a mention of tapered heads to help locate, but this is his game not mine...
Said he has to cut a taper to the mounting face since the drum face is not flat, and he'll clean up and taper the spoke flange and cut the contour in the middle to match the front hub.
Its also getting a stainless insert for the bearings, so they're no pressed straight into the aluminum
![Image](http://i724.photobucket.com/albums/ww241/Karnage-fab/Kandy/photo3-4_zps4816003f.jpg)